Aqua Coolers (378 KB)
Now fitted with an industrial grade 304 stainless steel tank
Robust construction to ensure longevity
Polished stainless steel top
Front panel removes for ease of servicing
Optional stainless steel cabinets
Simple filter changes for filtered units
Adjustable, tamper proof non-squirt bubbler and glass filler
PROUDLY AUSTRALIAN MADE
All have a 1.5 litre stainless steel tank within the chilling chamber to meet peak usage periods. This tank is fabricated from industrial grade
304 stainless steel for your piece of mind.
All refrigerant gases are non-toxic, non-flammable and environmentally sympathetic. The refrigerant flow is controlled by a capillary tube,
which has no moving parts. To give maximum heat exchange a suction line is fitted.
M2/M3 – Uses 250 gms of R134A refrigerant
M4/M5 – Uses 190 gms of R134A refrigerant
M10/M11 – Uses 127 gms of R22 refrigerant
WATER FLOW CONTROLS
The bubbler is rated to supply 1.7 litres per minute at mains water pressure of between 140 and 700kPa. An automatic, self-regulating
control is fitted to overcome varying mains pressure.
Water inlet – 1/2” male B.S.P.
Water outlet – 40mm Female F.P.V.C. pipe
The thermostat is factory pre-set.
M2/M3 - 1/8 h.p. capacity 138 watts
M4/M5 – 1/5 h.p. capacity 230 watts
M10/M11 – 1/4 h.p. capacity 430 watts
Copper tube and expanded aluminium fin.
240 volts, 50Hz. A 2 metre house cable and 3 pin plug is supplied.
PERFORMANCE TO ARI 1010-94 STANDARD
Water Inlet – 26.7ºC
Water Outlet – 10ºC
Ambient Air – 32.2ºC.
WEIGHT - PACKED
M2/M3 - 26kgs
M4/M5 - 28kgs
M10/M11 - 30kgs
Width – 350mm Container Capacity
Depth – 350mm 20ft – 192 units
Height – 1100mm 40ft – 396 units
Twelve months comprehensive coverage.
Five years for compressor replacement